Truck Driver Twitter

Loading..

 

 

 

Stoneridge SE5000 v6 Overview

 

Driver 1 Drawer

This is where the Digital tachograph Card for driver 1 should be inserted, the drawer is opened by the 'Driver1 Drawer Open' button, alongside the drawer.

# WARNING: The Driver Card draw opens no more than 1 inch (25mm), forcing the draw could break it and lead to the replacement of the complete Digital Tachograph Unit

 

Driver 1 Drawer Open/Mode Change Button

Press and hold this button for 2 - 3 seconds and Driver 1 Drawer will pop open approximately 1inch (25mm), allowing the Digital Tachograph Card to be slid into place.

Additionally, a short press of this button changes Driver 1 Mode of Operation, cycling through Rest, POA and Other Work.

 

Driver 2 Drawer

This is where the Digital tachograph Card for driver 2 should be inserted, the drawer is opened by the 'Driver 2 Drawer Open' button, alongside the drawer.

# WARNING: The Driver Card draw opens no more than 1 inch (25mm), forcing the draw could break it and lead to the replacement of the complete Digital Tachograph Unit

 

Driver 2 Drawer Open/Mode Change Button

Press and hold this button for 2 - 3 seconds and Driver 2 Drawer will pop open approximately 1inch (25mm), allowing the Digital Tachograph Card to be slid into place.

Additionally, a short press of this button changes Driver 2 Mode of Operation, cycling through Rest, POA and Other Work.

 

Print Roll Draw

This drawer holds the printer roll and is designed to make the operation easy, once the drawer is ope simply drop the roll into place. A spare printer roll should always be carried.

 

Back/Cancel Button

Once you have found the information/display screen that you require this button will take you back the route you came one step at a time. Useful when you are not sure where you are and dont want to select the wrong thing.

 

Up Select Button

For navigating through the Digital tachograph Unit Menu and highlighting options within pages.

 

Down Select Button

For navigating through the Digital tachograph Unit Menu and highlighting options within pages.

 

Enter/OK

Once the correct option or values have been selected this button is a simple confirmation, press to complete.

This button is also used to accept warnings, for example 'Overspeed' warnings, which remain on the screen after the event, one press and you will be returned to the main display page.